What’s in the box and what you’ll need
In the box:
- Watchdog WD-1 with the battery inside,
- USB-A to USB-C cable, 1 m,
- “Getting started” leaflet with safety information.
You’ll need:
- a USB charger with a USB-A port, e.g. from a phone — not included. Only have a charger with a USB-C port? Use a USB-C to USB-C cable,
- 2.4 GHz Wi-Fi with internet access, and its password,
- a phone,
- the e-mail address you gave when ordering — your Watchdog account has already been set up for it.
You don’t need an app or access to your router’s settings.
Where to put your Watchdog
- Within Wi-Fi range — where your phone gets a good signal.
- Near a socket that always has power — not on an extension lead with a switch.
- For meter reading — as close as possible to the water and heat meters, e.g. in the hallway. Not in the bathroom.
- In a dry room, away from radiators and direct sunlight.
- Don’t cover the vents in the side — that’s how Watchdog measures temperature, humidity and noise.
- Don’t shut it in a metal cabinet — metal weakens radio signals.
Step-by-step setup
- 1. Plug it in. Plug the cable into the USB-C port on the side of the Watchdog and the other end into a charger in the socket. Watchdog has no power switch — it turns on by itself and after a moment starts its own Wi-Fi network called “Watchdog-…” (the name ends with the module’s 4-character ID).
- 2. Connect your phone to the “Watchdog-…” network. In your phone’s Wi-Fi settings, choose the “Watchdog-…” network (no password). The setup page will open by itself, just like hotel Wi-Fi. If it doesn’t, type watchdog.com.pl (without “https://”) or 192.168.4.1 into your browser. Your phone may warn you that this network has no internet — stay connected to it.
- 3. Choose your Wi-Fi. Pick your network from the list, enter its password and the e-mail address you gave when ordering, then tap “Connect”. Watchdog will check the password, the connection and the account — the “Watchdog-…” network disappears while it does. If something goes wrong, the network comes back with a hint, e.g. to move the Watchdog closer to the router.
- 4. Confirm in the dashboard. Log in at watchdog.com.pl. You set your password using the link in the “Your Watchdog account is ready” e-mail you received after ordering. On the Home page, click “This is my Watchdog” — without this, the Watchdog won’t be added to your account. That’s it.
Setup page won’t open, or the browser shows an error? More tips: Setup help.
After setup
- Choose your meters in the dashboard. Watchdog finds the meters in range by itself, and you pick which ones are yours.
- Choose who should get notifications.
- Turn on the alarms you need, e.g. for temperature, humidity or noise. The noise sensor is off by default — you turn it on in the dashboard.
How each feature works: How it works. Answers to common questions: Questions and answers.
Safety
Read before first use. Keep the leaflet from the box and pass it on with the Watchdog if you give it to someone else.
Placement
- For indoor use only, in dry rooms — not in a bathroom or outdoors.
- Protect it from water and other liquids. Don’t put containers of liquid on the Watchdog.
- Don’t place it near a radiator or fireplace, or in direct sunlight.
- Don’t cover the vents in the side of the case.
Power supply
- Power it from a CE-marked 5 V USB charger, e.g. one from a phone, using the supplied cable or another USB cable in good condition.
- Don’t use a damaged charger or cable.
- Watchdog has no power switch. When unplugged, it keeps running on its battery — to switch it off completely, remove the battery (see below).
Lithium-ion battery
- Don’t crush, puncture or heat the Watchdog. Don’t throw it into a fire.
- Don’t short-circuit the cell’s terminals, e.g. with metal objects.
- Is the Watchdog getting very hot, swelling, or giving off a smell or smoke? If it’s safe to do so, unplug the charger and move it away from anything flammable. Stop using it and write to us.
Radio waves
- Watchdog transmits radio waves (Wi-Fi and LoRa). Place it at least 20 cm away from places where people spend a long time, e.g. a bed.
- Do you have a pacemaker or another implant? Ask your doctor or the implant manufacturer about a safe distance.
Children, cleaning, repairs
- Watchdog is not a toy. Keep it and its cable out of the reach of young children.
- Clean with a soft, dry cloth.
- Don’t modify the Watchdog. Apart from replacing the battery, don’t repair it yourself — write to us.
Battery — type and replacement
- Type: lithium-ion (Li-ion), 18650 cylindrical cell, 3.7 V.
- Charging: automatic whenever the Watchdog is connected to a charger.
The battery only needs replacing once it has worn out.
How to remove the battery safely
- 1. Unplug the USB-C cable.
- 2. Undo the four screws in the corners of the lid with a PH1 Phillips screwdriver. The screw heads are under the sticker — you can feel them with your finger and pierce the sticker with the tip of the screwdriver. Lift off the lid.
- 3. Take the cell out of its holder with your fingers, without using metal tools. Without the battery and the cable, the Watchdog is completely switched off.
- 4. Insert the new cell the same way as the old one — with the “+” terminal facing the same way. Put the lid back on and screw the screws back in — tighten them gently, only until they stop, as the thread is in plastic. Reconnect the cable.
Only use Li-ion 18650 cells rated at 3.6–3.7 V. Tape over the terminals of the removed cell and take it to a battery collection point.
Disposing of the device and battery
The crossed-out wheeled bin symbol on the sticker and the leaflet means that a used Watchdog and its battery must not be thrown away with other waste. The bar under the bin shows that the equipment was placed on the market after 13 August 2005.
Why. Electronics and batteries contain substances that are harmful to the environment and to health, e.g. nickel and cobalt compounds and a flammable electrolyte. Thrown in the bin, they can get into soil and water, and a damaged battery can start a fire in a bin lorry or a sorting plant.
Where to take it — free of charge. To your local council’s waste collection point (PSZOK) or to a large electronics shop that will take back a small device without you buying anything. Put the battery on its own into a used-battery collection box.
By handing in old equipment, you help it get reused and recycled. Remove the Watchdog from your account first — see below.
If something isn’t working
- I can’t see the “Watchdog-…” network. Check that the charger is plugged into the socket and wait a moment. A Watchdog that has already been set up doesn’t turn this network on — that’s normal.
- The setup page won’t open. Type watchdog.com.pl (without “https://”) or 192.168.4.1 into your browser. More: Setup help.
- Watchdog won’t connect to my Wi-Fi. Watchdog works on 2.4 GHz networks — it can’t see 5 GHz networks. Check the password and move it closer to the router.
- New router or new Wi-Fi password. If the Watchdog is online, change the network in the dashboard: Settings → Wi-Fi network → “Change Wi-Fi”. If it has no network: after 15 minutes, it turns on the “Watchdog-…” network for 10 minutes every hour — connect to it and choose the new Wi-Fi.
- The dashboard doesn’t show my meter. Move the Watchdog closer to the meter and use the “Scan now” button in the dashboard. Also check whether your meter is on the list of compatible meters.
- Something else. Have a look at the questions and answers or write to us.
Technical data
- Model: Watchdog WD-1
- Power supply: 5 V DC, 2 A, USB-C port
- Battery: Li-ion 18650, 3.7 V, replaceable
- Connectivity: Wi-Fi 2.4 GHz; LoRa radio 868 MHz (LoRaWAN); wM-Bus meter receiver 868 MHz (EN 13757-4)
- Sensors: temperature and humidity; noise (loudness only, no recording); power loss
- Dimensions: 86.5 × 84 × 30 mm
- Use: indoors, in dry rooms
- Requirements: 5 V USB charger, 2.4 GHz Wi-Fi with internet, account at watchdog.com.pl
- In the box: Watchdog, USB-A to USB-C cable 1 m, “Getting started” leaflet
- Software: updates itself automatically over the internet
Frequency bands, transmit power and EU declaration of conformity
- Wi-Fi (IEEE 802.11 b/g/n): 2400–2483.5 MHz, max. 20 dBm e.i.r.p. (100 mW)
- LoRaWAN: 867.1–868.5 MHz, max. 14 dBm e.r.p. (25 mW)
- LoRa — neighbourhood network: 869.4625 MHz, max. 22 dBm e.r.p. (158 mW)
- wM-Bus (meter reading): 868.3 and 868.95 MHz, receive only
Simplified EU declaration of conformity
Hereby, SNAP2 Sp. z o.o. declares that the radio equipment type Watchdog WD-1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://watchdog.com.pl/deklaracja
The CE marking and the crossed-out wheeled bin symbol are on the sticker on the bottom of the Watchdog and on the leaflet from the box.
Returns, complaints and passing your Watchdog on
- 30 days to return it. Within 30 days of receiving the parcel, you can return the Watchdog without giving a reason. We refund the price and the delivery cost; sending it back is at your expense.
- Complaints. We are liable for the Watchdog’s conformity with the contract for 2 years from delivery. Write to [email protected] — we’ll reply within 14 days.
- Details: Terms of Sale.
Giving away or selling your Watchdog? First wipe it in the dashboard: Settings → General → “Factory reset…”, then “Remove from account…”. The new owner will start from scratch, without your history.
Watchdog lost or stolen? Write to us — we’ll block it.
Manufacturer and paper copy of this manual
SNAP2 Sp. z o.o., ul. Hoża 29, 00-521 Warszawa, Poland
e-mail: [email protected] · contact form
We’ll send you a paper copy of this manual free of charge. E-mail us with your postal address, or use the contact form.
Watchdog WD-1 · Edition 1 · October 2026